Profit First for Construction FAQ
Owner pay and distributions: contractor questions answered
Your pay is a line in the system, not the leftovers, and these answers cover how to schedule it and when to raise it.
Related topics:Billing, WIP, and retainageGrowth and scaling: hiring, entities, and special cases
Paying yourself as a construction owner
What’s the difference between owner pay and profit distributions in Profit First for Construction?
The short answer
Owner’s Compensation is your pay for the work you do inside the business, funded on a regular schedule so you never skip a check; Profit is your return on owning the business, taken quarterly from the Profit account as a deliberate reward, not whatever happens to be left over.
Why it’s different in construction
Construction cash flow is lumpy: a big pay app hits one week, nothing comes in for three weeks, then retainage trickles back months later. Without a dedicated Owner’s Compensation account, owners in this industry are the first ones to go unpaid when a draw is late or a sub needs to be covered. Keeping the two accounts separate means your livelihood isn’t hostage to project timing, and your quarterly Profit distribution reflects actual available cash, not a project milestone like substantial completion or retainage release.
From the field
A husband-and-wife concrete contractor had been running their small crew for eight years and had never once set a formal owner salary. They paid themselves whatever was left after payroll and subs, which some months was nothing. The wife tracked it on a spreadsheet and called it ‘owner draws,’ but there was no rhythm and no discipline; if a pay app was late, they went without. After setting up separate Owner’s Compensation and Profit accounts and funding Owner’s Comp on every allocation day, they got their first consistent paychecks within 60 days. At the end of their first full quarter, there was roughly $18,000 sitting in the Profit account, money they had never seen before because it had always leaked out. They took half as a personal reward and kept the other half in the business to build reserves. The wife said it was the first time in eight years she felt like the business was actually working for them.
From the book, Chapter 10, p. 167
“I can buy some equipment,” Mark said. “Remember, if you buy equipment with it, it’s not profit,” I said. “The idea is to make the business healthier.” “Since when is investing in equipment wasting money?” Elvis asked. “I see you haven’t gotten over your equipment addiction,” I said with a smile. “No, but isn’t reinvesting in my business making it healthier?” he asked. “Elvis,” Alex interjected, “you told us you haven’t really reaped any rewards from your business. Contractors always justify that by telling themselves that someday things will be different. Shouldn’t that someday start now?”
Where people get it wrong
A lot of contractors treat owner pay and profit as the same thing: ‘I’ll just take what’s left.’ The problem is that ‘what’s left’ in construction is often nothing, or it’s tied up waiting on retainage, and the owner ends up working for free. Mixing owner pay and profit is like a plumber who invoices parts and labor as one lump number: it looks simpler until something goes wrong and you can’t tell what you actually made. Owner’s Compensation is pay for your labor; Profit is a return on your risk. They serve different purposes, they live in different accounts, and conflating them means you never really know whether the business is profitable or whether you’re just paying yourself out of job money.
In the book: Profit First for Commercial Construction, Chapter 9, Creating Clarity: Considering Your Banking Needs.
What should I do if cash is tight and I can’t pay myself on schedule?
The short answer
When owner pay gets squeezed, diagnose the cause first (pricing, collections, overhead, growth, or a one-time hit), then make a deliberate decision about your pay rather than defaulting to skipping it indefinitely. Letting unpaid owner labor become routine is not a strategy; it’s a slow way to finance the business on your own back.
Why it’s different in construction
Construction cash flow is lumpy by nature: pay apps come in batches, deposits arrive early and then stop, and retainage sits uncollected for months. A design-build shop with field staff also carries payroll every week regardless of billing timing, so the gap between cash in and cash out can be wide. When a squeeze hits, employee payroll and essential job obligations may need to come first as a deliberate, one-time call, but that decision should be made consciously, not by default. In a partnership, agree in advance on how temporary owner-pay changes will be handled so the conversation doesn’t happen in a panic.
From the field
A design-build GC with about 25 field staff had been skipping his own paycheck for three months straight, telling himself he’d catch up once the big project wrapped. The real problem wasn’t the project; it was that his OpEx allocation hadn’t kept up with the crew he’d added, so overhead was quietly bleeding the Income account dry before he ever got to Owner’s Comp. Once he sat down and separated a one-time equipment repair from the ongoing overhead creep, he could see two distinct problems. He covered the repair from reserves and then worked with his CPA to trim two nonessential overhead items and nudge his pricing on the next bid. Within about six weeks he was back on a regular biweekly owner-pay schedule, and he and his wife agreed that if it ever happened again they’d flag it at the first cash meeting rather than waiting.
From the book, Chapter 7, pp. 125 to 126
“How long have you been doing this?” I asked. “Over twenty-five years now,” came Elvis’s reply. “And you’re still not taking home a regular paycheck?” “Well, yeah,” Elvis said, “but I should be able to sell my equipment. Plus, hopefully someone will buy the company from me.” […] “And if you aren’t taking home a consistent paycheck, why would someone else want to buy your business?”
Where people get it wrong
A common bad habit is treating the owner as the business’s permanent emergency fund, skipping owner pay month after month and calling it “reinvesting in the business.” Skipping your own paycheck to keep the business afloat is like supplying your own materials for free and calling it a margin improvement: it hides the real problem instead of fixing it. The fix isn’t to keep skipping your check: it’s to diagnose whether the shortfall is a one-time hit you can cover from reserves or a systemic pricing and overhead problem that needs to be solved at the allocation level.
In the book: Profit First for Commercial Construction, Chapter 12, Managing Curveballs: Navigating Cash Flow Disruptions.
How often should I distribute owner’s compensation and profit?
The short answer
Owner’s compensation should be funded on a consistent schedule (weekly or biweekly works well for most contractors), so your household runs on a reliable paycheck rather than whatever happens to be left over; profit distributions are taken quarterly, at the end of the quarter, based on actual cash in the Profit account.
Why it’s different in construction
Design-build GCs often have lumpy pay applications and retainage that can make cash feel feast-or-famine, which tempts owners to skip their own paycheck in slow weeks and then take a large draw when a big check clears. That pattern makes it nearly impossible to separate routine compensation from profit. Keeping Owner’s Comp on a steady cadence, funded through your normal allocation rhythm, means your personal budget doesn’t swing with the billing cycle. Profit stays in the Profit account until quarter-end regardless of whether a project just reached substantial completion or retainage just released.
From the field
A design-build GC with about 15 employees had been running the business for six years and still didn’t have a consistent paycheck. The owner pulled draws whenever a big pay app cleared and went weeks without paying himself when things were slow. His spouse had no idea what to expect month to month, and the business books were a mess of owner draws that made it impossible to see real profitability. After setting up an Owner’s Comp account and committing to a biweekly transfer of a fixed amount, his household stabilized within about 60 days. At his first quarter-end Profit Day, there was roughly $22,000 sitting in the Profit account, money he would have spent piecemeal on draws and equipment before the system was in place. He took half as a reward and moved the other half to the Vault.
From the book, Chapter 15, p. 225
It was so tempting to dip into the Profit account when cash was tight. Once I forced myself to leave it alone, it started to grow. Seeing that balance build really boosted my confidence. It’s making a difference.” “Great,” I said. “If we raid profit any time we want, we haven’t learned anything. We need to remember to let it accumulate and then take our profit distribution on a quarterly basis. Like a kid waiting for Christmas, the anticipation of taking that profit is exciting. You don’t want to be the kid who insists on getting the toy right now because that doesn’t teach financial discipline.”
Where people get it wrong
Some contractors tie their profit distribution to a project milestone: waiting for substantial completion, retainage release, or punch list sign-off before taking anything out. Waiting on a milestone to take profit is like refusing to cash your paycheck until every punch-list item on every open job is signed off: the work was done, the quarter closed, but you’re still waiting on someone else’s paperwork. That approach makes profit feel like it depends on one client’s payment behavior rather than on how the whole business performed over the quarter. Profit First for Construction is clear: distributions happen at quarter-end based on what’s actually in the Profit account, not when a particular job wraps up.
In the book: Profit First for Commercial Construction, Chapter 10, System Maintenance: Quarterly Reviews and Timely Actions.
Why can a separate Owner’s Compensation account be useful?
The short answer
A separate Owner’s Compensation account makes your pay visible, intentional, and harder to skip, because when owner pay lives in the same pool as everything else, it’s almost always the first thing that gets quietly sacrificed when cash gets tight.
Why it’s different in construction
In construction, cash flow is lumpy by nature: a big pay app lands, then nothing for three weeks, then retainage trickles in months later. Without a dedicated account, owner pay tends to get deferred every time there’s a gap, and ‘I’ll catch up next month’ becomes a years-long habit. A separate account also forces a useful distinction: compensation is what you earn for running the business day to day, and profit is your return on owning it. Blurring those two is one of the most common reasons construction owners feel underpaid even in good years.
From the field
The owner of a landscape construction company with about 15 employees had been in business for eight years and couldn’t remember the last time he’d taken a full paycheck two months in a row. He tracked everything on a spreadsheet and assumed that was good enough. When he set up a dedicated Owner’s Compensation account and started funding it on the same schedule as every other account, something shifted: for the first time, his own pay felt like a real line item instead of whatever happened to be left over. Within three months he was taking a consistent draw, and within a year he’d stopped subsidizing the business with his personal savings, a habit he hadn’t even fully recognized until it stopped.
From the book, Chapter 9, pp. 147 to 148
“So if we add the Payroll account, do we really need the separate Owner’s Compensation account?” Pam asked. “Can’t we just keep up with it on spreadsheets?” “I get that question all the time. The short answer is yes, you do need to separate it, but I’ll let Roger answer this one. Roger, do you see the need for the separate Owner’s Compensation account?” “Well, I haven’t missed a check since we implemented this system,” he replied. “And if your pay was tracked on a spreadsheet or on paper, what do you think would happen?” I asked. “It would disappear. Now that you say that I agree with you—we have to have it, Pam,” Roger said.
In the book: Profit First for Commercial Construction, Chapter 9, Creating Clarity: Considering Your Banking Needs.
How do I determine how much Owner’s Compensation the business can support?
The short answer
Owner’s Compensation is determined by your Residual Revenue (what is left after JobEx and OpEx) and the gap between your Current Allocation Percentages (CAPs) and the Target Allocation Percentages (TAPs) you set based on your own numbers and goals.
Why it’s different in construction
A masonry contractor with 60 employees carries a heavy labor burden, and the line between what the business needs and what the owner wants to take home can get blurry fast. CAPs show you the honest picture: after materials, subs, and overhead are accounted for, how much is actually left? If Residual Revenue is thin, the answer to higher owner pay is almost always raising prices, reducing costs, or winning more efficient work, not adjusting a percentage. Retainage timing can make Residual Revenue look smaller in a given month than it really is over a full year, but that is a cash-flow timing issue, not a reason to change your Owner’s Comp allocation percentage.
From the field
The owner of a 60-person masonry company had been paying himself inconsistently for years: big draws in good months, nothing in slow ones. When he built his CAPs, he discovered that Owner’s Comp was effectively 4% of revenue, far below what he needed to cover personal obligations. His TAPs, built from his own revenue and cost history, showed a realistic path to roughly doubling that over six quarters by trimming two underperforming overhead line items and adjusting bid markups on labor-heavy work. He opened a dedicated Owner’s Compensation account and started funding it at his CAP percentage immediately, even though it felt small. Eighteen months later he was drawing a consistent paycheck every two weeks and had not missed one in over a year.
Where people get it wrong
It is tempting to look up what other masonry or commercial contractors pay themselves as a percentage of revenue and use that as a target. Those benchmarks do not account for your debt load, your market, your crew mix, or your equipment obligations. Your TAPs have to come from your own numbers: there is no industry table that tells you what your business can support.
In the book: Profit First for Commercial Construction, Chapter 6, Setting Targets: Knowing What to Shoot For.
Why does Profit First for Construction treat owner pay as a non-negotiable item?
The short answer
Profit First for Construction funds Owner’s Compensation on a set schedule so the business proves it can support the owner, rather than leaving the owner with whatever happens to be left after everyone else is paid.
Why it’s different in construction
Construction owners are especially vulnerable to the “pay everyone else first” trap because crews, subs, and suppliers all have leverage: they can walk off the job or cut you off. That pressure makes it easy to delay your own check indefinitely. A dedicated Owner’s Compensation account makes your pay visible and intentional, so a tight cash week shows up as a signal to diagnose rather than a reason to skip yourself again.
From the field
A second-generation commercial painting contractor had taken over from his father and kept the same habit: pay the crews, pay the subs, pay the suppliers, and take whatever was left. Some months that was a real paycheck; other months it was nothing. After two years running the business himself, he had no idea whether the company actually supported his family or whether he was quietly subsidizing it. When he set up a dedicated Owner’s Compensation account and started allocating to it on a consistent schedule, the first two months were eye-opening: the account ran short, and he had to look hard at his pricing. Within about six months of tightening margins on smaller repaint jobs and raising his markup on new commercial work, the account funded reliably. For the first time, he could tell his spouse with confidence what his income was.
From the book, Chapter 15, p. 225
“I’m finally starting to see those rewards,” Kevin said. “I’m not just paying my crew on time; I’m finally taking a regular paycheck home now. It’s been a game changer for keeping things steady on the jobsite and I can see brighter days ahead.”
Where people get it wrong
A common misconception is that taking owner pay last is somehow noble or prudent: that a good owner “reinvests everything” and takes a salary only when the business is flush. In practice, that habit hides whether the business model works at all. If the company can’t fund a consistent owner paycheck, that’s a pricing or cost problem that needs to be fixed, not a sacrifice the owner should keep making indefinitely.
In the book: Profit First for Commercial Construction, Chapter 9, Creating Clarity: Considering Your Banking Needs.
When is it safe to increase my owner pay in construction?
The short answer
Increase Owner’s Compensation when your business can sustainably support it (meaning profitability, cash flow, working capital, and backlog all point in the same direction), and make that change at quarter-end, not in reaction to a strong week or month.
Why it’s different in construction
Construction cash flow is lumpy by nature: a big pay app hits, the account looks flush, and it’s tempting to bump your draw right then. But that money may already be spoken for: materials on the next phase, a sub invoice due in two weeks, or a payroll cycle coming up. Seasonality adds another layer; a strong spring doesn’t guarantee a strong fall. Review the full picture (backlog, upcoming obligations, and actual cash position) before you touch the Owner’s Comp percentage.
From the field
A landscape construction company with close to 100 employees had grown steadily, and the owner figured the growth justified a bigger paycheck. He raised his draw mid-quarter after a run of strong billings, without checking what was already committed to subs and materials. Six weeks later, payroll got tight and he had to pull from reserves to cover it. At the next quarterly review, he rebuilt his CAPs from actual numbers, confirmed the business could support a higher Owner’s Comp percentage, and made the change at quarter-end. His pay went up (and stayed up) because the timing was right and the numbers backed it.
From the book, Chapter 10, pp. 165 to 166
“I watched it slowly build, and it looks like I may actually have extra in my JobEx account,” Paul answered. “That’s good,” I said. “I often advise people to put extra money in that account so they avoid getting into the habit of borrowing from the next job.” “So what do you think I should do?” Paul asked. “If you feel like you won’t need it for job expenses,” I said, “maybe you can shave a percentage point or two from that account going into this quarter and reallocate it to your Owner’s Compensation or Profit account.” “I like the thought of that,” Paul said. “Ultimately, that’s how you start finding more profit in your business,” I said.
In the book: Profit First for Commercial Construction, Chapter 9, Creating Clarity: Considering Your Banking Needs.
How do I pay myself correctly in construction without starving the business?
The short answer
Profit First for Construction separates Owner’s Compensation, your pay for the work you do in the business, from Profit, which is your return for owning it; funding both deliberately on a consistent schedule keeps you paid without draining the accounts that cover jobs and overhead.
Why it’s different in construction
Construction cash flow is lumpy: a big pay app hits one week, then nothing for three weeks, and it’s tempting to grab a large owner draw whenever money is in the account. It’s like eating the whole week’s groceries the day they arrive because the fridge looks full: by Wednesday there’s nothing left when the crew needs to be fed. That pattern starves JobEx and OpEx at exactly the wrong moment. Setting a consistent Owner’s Compensation cadence (weekly, biweekly, or aligned with your pay apps) means your pay comes out of what the business has actually allocated, not out of whatever happens to be sitting in the checking account.
From the field
A design-build GC with about eight employees had been paying himself whenever the account looked healthy, sometimes a big draw after a large deposit, sometimes nothing for six weeks. The crew got paid on time; the owner didn’t. After setting up a dedicated Owner’s Compensation account and allocating a fixed percentage of every deposit into it, he started taking a consistent biweekly draw of roughly $4,000. Within three months he had stopped the feast-or-famine cycle, and for the first time he could tell his spouse what he would bring home each month. The business still covered its jobs and overhead because the money was allocated before any of it got spent.
From the book, Chapter 2, pp. 39 to 40
It seems like I’m running a company for the benefit of my employees, for the subs, for all of the materials suppliers—everybody but me.” […] “I understand, but if you can’t learn to run the company so that it at least covers your salary and taxes—much less any profit—who else will if you can’t work any longer?”
Where people get it wrong
A lot of contractors believe the right move is to pay themselves last: whatever is left over after jobs, subs, and overhead is the owner’s share. That thinking almost guarantees the owner gets nothing, because in construction there is rarely anything left over when you operate from one account. The book notes in Chapter 9 that without a dedicated account, owner pay tends to get skipped when cash is tight. Paying yourself intentionally through allocation is not selfish; it is what keeps you in business.
In the book: Profit First for Commercial Construction, Chapter 9, Creating Clarity: Considering Your Banking Needs.
What does it mean to fund the owner first, and why does it matter?
The short answer
Funding the owner first means allocating a set percentage to a dedicated Owner’s Compensation account on a consistent weekly or biweekly schedule, before profit emergencies, equipment needs, or slow pay apps have a chance to crowd it out. If the business model can’t sustain that allocation, Profit First for Construction treats that as a signal the model itself needs fixing, not a reason to keep skipping your paycheck.
Why it’s different in construction
On a glass and glazing job, or any specialty trade, pay apps arrive in lumps and retainage sits out for months, so the Income account can look flush one week and thin the next. A fixed Owner’s Comp cadence gives the owner’s household a steady, predictable income even when project draws are irregular. Without a dedicated account, owner pay is almost always the first thing that gets quietly deferred when a job runs long or a sub invoice comes in early, and that deferral has a way of becoming permanent.
From the field
For years, the owner of a glass and glazing contractor with about 25 field staff paid himself whatever was left after subs, materials, and payroll cleared, which some months was nothing. He told himself it was temporary, but 18 months in he was carrying nearly $40,000 in informal loans he’d made to his own business. After setting up a dedicated Owner’s Compensation account and allocating even a modest percentage from every deposit, he started receiving a consistent biweekly transfer to his personal account for the first time. The discipline of the separate account made the problem visible: his margins on two recurring clients were too thin to support his overhead, and he either needed to reprice or replace that work. Within about four months of repricing one of those clients, his Owner’s Comp account stopped running short.
From the book, Chapter 3, p. 57
I told her to make herself a plate before putting any food out on the buffet, and to start putting money aside for herself.” “I understand where she’s coming from,” Roger said. “I know you can relate,” I said, “and I can too. This is a concept that I personally struggled with for many years in my own business. Everyone else came first, and my paychecks were very sporadic. Accounting firms have serious seasonality problems, and it was only after understanding Profit First principles and implementing the system myself that I truly came to understand why it works so well. We can’t keep playing the same game and expect to win.”
Where people get it wrong
Many contractors believe paying themselves last is the responsible, owner-first move: proof they’re committed to the business. In practice it just means the business is being financed by unpaid owner labor, and the real cost of running the company is hidden. Profit First for Construction flips that: if the allocation percentages can’t cover a fair owner wage, the system is telling you your pricing or overhead needs attention, not that you should keep working for free.
In the book: Profit First for Commercial Construction, Chapter 9, Creating Clarity: Considering Your Banking Needs.
Taking profit distributions
Should I skip a quarterly profit distribution just because a big project still has retainage?
The short answer
Unreleased retainage is not a reason to skip or delay a quarterly profit distribution: it is a cash-timing and working-capital issue, not a distribution gate. Take your quarterly profit based on actual cash in the Profit account, weighed against taxes, upcoming obligations, and working-capital needs.
Why it’s different in construction
Commercial and public-sector construction regularly ties up part of every contract in retainage for months, sometimes longer on government work. That creates real working-capital pressure, but the answer is to plan for the gap in your bid pricing and liquidity planning, not to hold your profit hostage until retainage releases. When retainage is finally collected, it goes into Income and is allocated at your normal percentages like any other deposit. Track unreleased retainage on your AR aging by project so you always know what’s outstanding and when to expect it.
From the field
A second-generation steel erection sub had been running solid margins for two years but hadn’t taken a single profit distribution. Every quarter, the owner pointed to a stack of open retainage on three or four public jobs and said the timing wasn’t right. When we dug into the numbers, the Profit account had been sitting untouched for eighteen months; about $140,000 had accumulated. The real problem wasn’t retainage; it was that the business had no Vault, no reserve cushion, and the owner had convinced himself that retainage release was the right trigger for taking money out. We set up a quarterly rhythm: at quarter-end, review actual cash, taxes owed, and near-term obligations, then take the distribution based on what’s genuinely there. The first distribution was $28,000: half kept in the business for reserves, half to the owner. Within two quarters the owner stopped dreading the retainage cycle because the system was running on its own logic, not on project milestones.
Where people get it wrong
A common mistake is treating retainage release as the natural trigger for a profit distribution: essentially a project-milestone gate. Profit First for Construction is clear that distributions happen at quarter-end based on actual cash in the Profit account, full stop. Tying a distribution to substantial completion, punch-list sign-off, or retainage release breaks the discipline of the system and usually just means the owner never gets paid.
In the book: Profit First for Commercial Construction, Chapter 10, System Maintenance: Quarterly Reviews and Timely Actions.